12 Fiber distribution box
Product Description
1. Description:
The equipment is used as a termination point for the feeder cable to connect with drop
cable in FTTx communication network system. The fiber splicing, splitting, distribution can
be done in this box, and meanwhile it provides solid protection and management for the
FTTx network building
2,Features:
1 Total enclosed structure
2 Material:PC+ABS, wet-proof、water-proof、dust-proof、anti-aging, protection level up to
IP65
3 Clamping for feeder cable and drop cable, fiber splicing,fixation,storage,distribution…etc
all in one
4 Cable, pigtails , patch cords are running through own path without disturbing each
other ,cassette type SC/LC/PLC adaptor installtion ,easy maintenance.
5 Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy
for maintenance and installation.
6..Cabinet can be installed by the way of wall-mounted,suitable for both indoor and
outdoor uses
3,Specification:
1,Environmental requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2,Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3,Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than
20000MΩ/500V(DC);IR≥20000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than
3000V(DC)/min, no puncture,no flashover;U≥3000V
4,Configuration table:
Model Description Material Capacity Size (mm)
FDP-12F distribution box PC+ABS 12 core 225×200×65
The equipment is used as a termination point for the feeder cable to connect with drop
cable in FTTx communication network system. The fiber splicing, splitting, distribution can
be done in this box, and meanwhile it provides solid protection and management for the
FTTx network building
2,Features:
1 Total enclosed structure
2 Material:PC+ABS, wet-proof、water-proof、dust-proof、anti-aging, protection level up to
IP65
3 Clamping for feeder cable and drop cable, fiber splicing,fixation,storage,distribution…etc
all in one
4 Cable, pigtails , patch cords are running through own path without disturbing each
other ,cassette type SC/LC/PLC adaptor installtion ,easy maintenance.
5 Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy
for maintenance and installation.
6..Cabinet can be installed by the way of wall-mounted,suitable for both indoor and
outdoor uses
3,Specification:
1,Environmental requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2,Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3,Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than
20000MΩ/500V(DC);IR≥20000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than
3000V(DC)/min, no puncture,no flashover;U≥3000V
4,Configuration table:
Model Description Material Capacity Size (mm)
FDP-12F distribution box PC+ABS 12 core 225×200×65