128 core inline Horizontal fiber optic splice enclosure
Product Description
The 128 core inline Horizontal fiber optic splice enclosure is a universal access junction box that allows the continuity and segregation of
large capacity optical cables used in the deployment of optical power and transport networks.
The design of the box allows the mechanical continuity of the tensile elements of the cables and protects the
fibers, the unions and the optical devices facilitating the organization of the splices and the storage of the
fiber excess.
The box is airtight and resistant to outdoor conditions so it can be installed both outside and inside buildings
in log houses, manholes, walls or cable galleries
Features:
4 independent cable accesses at one end. Each of them allows the individualized entry of at
least two large and medium capacity multi-fiber cables (double inputs) and up to 6 small
capacity optical cables.
The closing lid is fully assembled and removed without the need for special tools thanks to the
clip type hermetic seal.
The sealing of access cables to the box is made by rubber joints with pre-cut entries.
Diameter inputs / outputs cables from 22 to 7 mm. Maximum 256 FO mergers.
Rectangular, rectangular shaped splice trays, easily accessible with extendable flanges for
better fiber storage up to 32 FO (double layer). Both the support block and the individual trays
allow the 90degree turn and its interlocking in fixed positions to facilitate installation.
The boxes can be opened, closed and manipulated without interrupting the circuits in
operation. It allows to join and segregate cables without having to cut all the fibers as well as
the adequate storage of the tubes and / or fibers left over from the cables.
Axial tension Load per cable> D / 45 mm x 1000 N. D: cable diameter. 1 hour by cable. Cable
displacement <3 mm
Bending by wire: 30 ° flexion max. 500 N. Application of force: 400 mm from the end of the
seal. No cycles: 5 / cable.
Cable twist: Maximum torque 90° / max 50 N. Application of force: 400 mm from the end of
the seal. No cycles: 5 / cable.
Vibration Frequency: 10 to 15Hz. Speed: one octave per minute. Cycle: sinusoidal; amplitude: 3
mm (6 mm ridge to ridge). Cable clamping: 500 mm from the end of the seal. Duration: 2 hours
per axis
Static load> 1000 N (25 cm2, 10min).
Operating temperature -25 to +70 C.
Totally hermetic and resistant to weather conditions. Degree of protection IP-68.
Application:
1. Telecommunication area.
2. Internet service.
3. Data center, CATV
4. FTTH
Specification:
Splice tray 8pcs, each tray 32core
Max Capacity 256core
Color Grey RAL 7035
Working Temperature -25°C - 70°C (5 to 95% relative
humidity)