Fiber optic cable GYTY53
Product Description
- Cable Specification
- Sheath Marking
- The color of marking is natural, but if the remarking is necessary, the yellow color marking shall be printed newly on a different position. The marking interval is 1 meter.
- An occasional unclear of length marking is permitted if both of the neighboring markings are clear.
- The both cable ends are sealed with heat shrinkable end caps to prevent water ingres. Ends A is red, and ends B is green.
- Fiber Color Indentification
No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Color | Blue | Orange | Green | Brown | Gray | White | Red | Black | Yellow | Violet | Pink | Aqua |
- Loose tube
Item | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Color | red | Green | Natural(N) | N | N | N | N | N | N | N | N | N |
- Cable Construction Parameter:
Fiber number | 2~36 | 38~72 | 74~84 | 86~96 |
Sheath outer diameter(mm) | 1.9 | 2.3 | 2.3 | 2.3 |
Tube number | 6 | 6 | 7 | 8 |
Max. fiber number per tube | 6 | 12 | 12 | 12 |
Cable outer diameter(mm) | 13.0 | 14.2 | 14.9 | 15.6 |
Cable weight(Kg/Km) | 230 | 265 | 270 | 290 |
Fiber number | 98~108 | 110~120 | 122~132 | 134~144 |
Sheath outer diameter(mm) | 2.3 | 2.3 | 2.3 | 2.3 |
Tube number | 9 | 10 | 11 | 12 |
Max. fiber number per tube | 12 | 12 | 12 | 12 |
Cable outer Diameter(mm) | 16.3 | 17.0 | 17.8 | 18.5 |
Cable weight (Kg/Km) | 310 | 335 | 360 | 380 |
- Fiber properties (The properties of SM optical fiber ITU-T Rec.G.652D)
Items | Specified Values |
Fiber Type | G.652 Single-mode fiber |
Mode Field Diameter@1310nm | 9.2±0.4μm |
Cladding Diameter | 125.0±1.0μm |
Mode Field Concentricity Error | ≤0.5μm |
Cladding No Circularity Error | 1.0% |
Cut-Off Wavelength | λcc(test 20m cable+2m fiber) ≤1260 nm |
Attenuation Coefficient 1310nm 1550nm | ≤0.36 dB/km ≤0.22 dB/km |
Dispersion Coefficient | 1288-1339nm≤3.5ps/nm.km 1270-1360nm≤5.3ps/nm.km 1550nm≤18ps/nm.km 1625nm≤22ps/nm.km |
Zero Dispersion Wavelength | 1300nm-1324nm |
Zero Dispersion Slope | ≤0.09ps/nm2.km |
PMD Q* | PMD Q*≤0.2ps/km1/2 |
Coating Diameter | 245±10μm |
Proof Test | 100kpsi(0.7Gpa) |
- Characteristic of Optical Cable
- Mechanical & environmental characteristics
- Cable bending radius:
- Mechanical & environmental characteristics
Dynamic:25×cable diameter
- Temperature Ranges
Operating Temperature | -40℃~+60℃ |
Storage and Transportation Temperature | -50℃~+70℃ |
Installation Temperature | -20℃~+60℃ |
- Main mechanical & environmental characteristics test
Item | Testing | Test Method | Acceptance Requirement |
1 | Tensile strength IEC 60794-1-E1 | Long term:1000N Short term:3000N Cable length:≥50m | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
2 | Crush Resistance IEC 60794-1-E3 | Long term:1000 N/100mm Short term:3000 N/100mm Add time:1 minute | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
3 | Impact IEC 60794-1-E4 | Height:1m weight: 1kg Impact spot:≥5 Impact cycle:at lease 3 cycle per spot | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
4 | Repeated Bending IEC 60794-1-E6 | Bending diameter:25X the cable outer diameter Applied load:25kg Bending cycle:30 times Bending speed:1 cycle per 2 s | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
5 | Torsion IEC 60794-1-E7 | Torsion length:1m Applied load:25kg Torsion angle:±90 or +180 Twist cycle:≥10 times | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
6 | Water Penetration IEC 60794-1-F5B | Water height:1m Cable length:3m Keeping time:24 hours | No water leaked from the opposite end of cable |
7 | Temperature IEC 60794-1-F1 | Temperature step:+20℃、-40℃、+60℃、+20℃ Keeping time:24 hours per each step Cycle:2 times | Loss change≤0.1dB@1550nm No fiber break and no sheah damage |
8 | Compound flow IEC 60794-1-E14 | Sample length:30cm Temperature:70℃±2℃ Keeping time:24 hours | No compound flow |
9 | Sheath high voltage Test | On line test DC 9t kV(t -sheath thickness,mm) | No sheath brokendown |
- Packing and Marking
- Packing
The both cable ends are sealed with heat shrinkable end caps to prevent water ingres. Ends A is red, and ends B is green.
At least 1 m of inside end of cable will be reserved for testing.
- Drum Marking(can according to the requirement in the technical specifications)
Manufacturing year and month;
Roll-direction arrow;
Cable type and size;
Drum number;
Cable length;
Gross weight;
Other customer information such as contract no., project no., and delivery destination. (if needed)
5.3. Cable identification documents
- Product qualified certificate;
- Test report.