PPC Miniflex optical cable type patch cord for FTTH pull type installation
Product Description
Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.
As the networking environment of today becomes increasingly dependent on high speed and high density solutions, effective cable management is a real issue. The key concern is how to manage more cable in a smaller amount of space.
Our uniboot fiber patch cord reduces cable management space by up to 68% compared to standard patch cords. The patch cord utilizes a special “round duplex” cable that allows duplex transmission within a single 3mm cable. As a result of these features our uniboot patch cord offers improved airflow and visibility of equipment within a high density network environment. Our uniboot patch cord is available in a wide variety of cable materials including LSZH, Plenum and
Riser.
Optical Specification
| Connector | LC | ||
| Polishing | SM/UPC | MM/PC | SM/APC |
| Insertion Loss(max) | ≤0.30dB | ≤0.25dB | ≤0.30dB |
| Return Loss(min) | ≥50 dB | ≥35 dB | ≥60 dB |
| Tensile Strength | >70N | ||
| Durability | <0.20 dB typical change, 1000 matings | ||
| Repeatability | ≤0.1dB | ||
| Storage , Operating Temperature [°C] | -40~+85 | ||
Geometric Specification (For special request)
PC End-face | APC End-face | ||
| Radius of Curvature | SC/FC/ST | 10~25 mm | 5~12 mm |
| LC/MU | 7~25 mm | 5~15 mm | |
| Apex Offset | ≤50 um | ||
| Fiber Spherical Height | +/- 50 nm | ||
| Angular Offset | —— | 8°± 0.2° | |
Clean and Scratch-Free End Face
Proportional geometric test is applied to the normal production.
100% interferometer check is available under special requirement.
Physical Information
Length tolerance: 0-5M: +5cm/-0cm ; 5-100m:+10cm/-0cm
Features:
Cost effective
Full duplex in a single 3mm diameter cable.
Available in OM3, OM4, OS1/OS2 (ITU-T G.652D or G.657A1) or ITU-T G.657A2 cabled fiber
types Available with LSZH, Plenum and riser rated cable
Save 50%of space in cabinets and cable ways
Protects network polarity
Clean and Scratch-Free End Face
Proportional geometric test is applied to the normal production.
100% interferometer check is available under special requirement
Application:
Fiber CATV, Fiber Cabling system, LAN,FTTH